Brick Repointing Old Basford, Nottingham

Professional Brick Repointing Services for Gable Ends and Property Backs | Chimney Stack Repairs

Description

Brick repointing Old Basford Nottingham was carried out to revitalise this property, with expert repointing services focused on the gable ends and the back of the property, with special attention to two chimney stacks.

Our skilled team ensured meticulous repointing, addressing structural integrity and aesthetic restoration throughout. Gable ends and chimney stacks are two of the most exposed parts of any property, taking the brunt of wind, rain, and frost all year round. Getting the repointing right in these areas matters more than almost anywhere else on the building, since failed mortar here is often what allows water ingress into the roof space and chimney breast. Working on two chimney stacks as part of the same job meant careful attention to matching the mortar mix and finish across both, so the property is left with a consistent, properly protected appearance.

Additionally, we carried out ridge tile replacement as part of the job, offering comprehensive solutions for the property’s restoration and remedial work rather than treating each issue in isolation. Trust our expertise to enhance the durability and visual appeal of your home.

• Date : July 2023
• Length of Job : 2 weeks
• Location : Old Basford, Nottingham

It is not what we say that matters, here is the review left on Yell.com by the client.

Why Lime Mortar?

Lime mortar has been used on British buildings for centuries, and for good reason — it’s softer and more porous than modern cement, which means it allows moisture to pass through and evaporate rather than becoming trapped. This breathability protects the brick or stone itself from frost damage and long-term erosion, and it’s particularly important on older and period properties, which were often built using lime pointing originally. Repointing with cement instead of llime is one of the most common — and most damaging — mistakes made on period properties.

Our Process

Every repointing job follows the same careful process, regardless of size:

1. Rake out — the old, failing mortar is carefully removed to the correct depth without damaging the surrounding brick or stone.
2. Clean — joints are brushed out and cleaned to ensure a proper key for the new mortar.
3. Repoint — a lime mix matched to the property’s age and existing mortar is applied throughout, joint by joint.
4. Finish — joints are finished to match the original style and profile, and the area is left clean and tidy.

This methodical approach is what gives a lasting, breathable finish rather than a quick surface fix.

The Result

The finished property is now able to breathe properly again, helping to protect the building fabric for years to come. The repointed brickwork not only looks the part on a period property, but functions the way it was originally intended to — letting moisture escape rather than trapping it within the walls.

FAQ

How long does repointing take?
This depends on the size of the property and scope of the work — jobs typically range from a few days for a single wall or chimney stack, up to two or three weeks for a full property repoint.

Is lime mortar more expensive than cement?
Lime mortar can cost a little more upfront than cement, but on period properties it’s the right choice — it protects the brick or stone long-term and avoids the damp and erosion problems that cement pointing can cause over time.

Do I need to be home during the work?
Not necessarily, though it can help for access. We keep dust and
disruption to a minimum throughout and always leave the site clean
and tidy at the end of each day.